hello All,
i have made 350ppm like 15times before but this time,
i tried 4 times and all times water is turning milky/snowy within first 15-20 of run minutes, when i start, I heat up water add ingredients in it and dissolve it thoroughly and water is clear what is wrong am i doing? or this normal or there is something which is too much in quantity or water is not hot enough? i just can not remember as I am making after 3 months. this is the method I am using
-----------------
320 ppm Gelatin Capped Metallic colloidal silver
Warning: Should be diluted to 20 ppm before use.
250ml cold distilled water
1.0 gram or 1/4 tsp Knox unflavored gelatin
Electrode spacing 1.5 inches
Add 5 drops 1M Sodium Carbonate
Add 15 drops clear Corn Syrup (diluted 1 to 1 with distilled water)
Electrolyze 80 minutes @ 15ma
Constant stirring and heat required. Heat water to a simmer (about 200F)
--------------------------------------
so i always make 1000ml so I increase all quantities to 4times and it worked all time
I always heat water first and then add all stuff and then start the cell.
for ex 4gm gelation, 20drops of 1M sodium carbonate, 15*4=60 drops of diluted corn syrup
gelatin is not expired, Corn syrup is not expired either.
Washing soda i made from sodiumbicarbonate couple months ago, thats what I am using
can someone help me out here, did I forget something since i am making it after 3 months or so?
Check attached pictures please
Regards
