Author Topic: HOW TO MAKE COLLOIDAL SILVER if you can't get a SilverTron  (Read 47814 times)

Smoke7

  • Guest
Re: HOW TO MAKE COLLOIDAL SILVER if you can't get a SilverTron
« Reply #90 on: April 11, 2020, 09:31:57 PM »
Awesome was waiting to receive Kehpras blessing!

Thanks All Going To Order On EBay!

Ed

I want to personally thank “cfinisbet” (sorry I do not know your name) for creating this thread and really helping us out. THANK YOU.

You are welcome.
« Last Edit: April 12, 2020, 06:57:38 PM by cfnisbet »

Etheric Zone 1111

  • Guest
Re: HOW TO MAKE COLLOIDAL SILVER if you can't get a SilverTron
« Reply #91 on: April 11, 2020, 09:46:45 PM »
Just ordered everything even a vented project box!

Ed

Offline imcool

  • Participant
  • **
  • Posts: 244
  • Likes: 7
Re: HOW TO MAKE COLLOIDAL SILVER if you can't get a SilverTron
« Reply #92 on: April 11, 2020, 10:55:54 PM »
Just ordered everything even a vented project box!

Ed
Are ebay sellers from USA are working? or you ordered from a seller who is based in China?

Etheric Zone 1111

  • Guest
Re: HOW TO MAKE COLLOIDAL SILVER if you can't get a SilverTron
« Reply #93 on: April 11, 2020, 10:57:19 PM »
US...

Smoke7

  • Guest
Re: HOW TO MAKE COLLOIDAL SILVER if you can't get a SilverTron
« Reply #94 on: April 12, 2020, 11:14:37 PM »
FYI.
A couple of days ago I was reading some of the previous posts on here and found one article about the distilled water posted by someone (didn’t memorize his name). He was saying that Wal-Mart distilled water has a 000PPM, so I went to my local Wal-Mart and bought 4 one-gallon jugs of water and tested them with a TDS meter (yes I know we can’t measure silver with TDS) and all 4 jars showed 005PPM in it. I am not sure if it was a bad batch or what? I went to Menards and purchased 1 gallon of water for the test and its result was 000PPM.
I just wanted to share this with you.
« Last Edit: April 13, 2020, 02:38:30 AM by Smoke7 »

Offline imcool

  • Participant
  • **
  • Posts: 244
  • Likes: 7
Re: HOW TO MAKE COLLOIDAL SILVER if you can't get a SilverTron
« Reply #95 on: April 13, 2020, 09:50:24 PM »
thats why I make my own distilled water,

Smoke7

  • Guest
Re: HOW TO MAKE COLLOIDAL SILVER if you can't get a SilverTron
« Reply #96 on: April 14, 2020, 01:10:43 AM »
thats why I make my own distilled water,
That is awesome.
I was going to make my own water distiller, but I only make colloidal silver once a year and have no other need for distilled water, so it’s just going to be sitting around the house taking up space.

Offline imcool

  • Participant
  • **
  • Posts: 244
  • Likes: 7
Re: HOW TO MAKE COLLOIDAL SILVER if you can't get a SilverTron
« Reply #97 on: April 14, 2020, 01:35:17 AM »
thats why I make my own distilled water,
That is awesome.
I was going to make my own water distiller, but I only make colloidal silver once a year and have no other need for distilled water, so it’s just going to be sitting around the house taking up space.
yes but I want to make gold water on regular basis too so i need distilled water

Smoke7

  • Guest
Re: HOW TO MAKE COLLOIDAL SILVER if you can't get a SilverTron
« Reply #98 on: April 14, 2020, 06:25:33 AM »
thats why I make my own distilled water,
That is awesome.
I was going to make my own water distiller, but I only make colloidal silver once a year and have no other need for distilled water, so it’s just going to be sitting around the house taking up space.
yes but I want to make gold water on regular basis too so i need distilled water
Lucky you, in my house only one person has GOLD: my wife. :)

Smoke7

  • Guest
Re: HOW TO MAKE COLLOIDAL SILVER if you can't get a SilverTron
« Reply #99 on: April 14, 2020, 09:50:08 PM »
One simple question.
Do I have to rinse all the bottles, containers, and glass with the distilled water to store the colloidal silver or it's only required when you are making colloidal silver?
Thank you.

I would say rinse out with Distilled Water before making it, and rinse out your storage bottles before using them.
« Last Edit: June 08, 2020, 08:59:16 PM by cfnisbet »

Etheric Zone 1111

  • Guest
Re: HOW TO MAKE COLLOIDAL SILVER if you can't get a SilverTron
« Reply #100 on: April 15, 2020, 12:52:07 AM »
Yes I was look8ng at a 50v 5ma Module to build my own power supply.

https://www.ebay.com/i/253362877198?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=253362877198&targetid=907798224154&device=t&mktype=pla&googleloc=9012276&poi=&campaignid=9338046428&mkgroupid=94993970859&rlsatarget=pla-907798224154&abcId=1139336&merchantid=118852035&gclid=CjwKCAjw1cX0BRBmEiwAy9tKHko8ptjYsioVKfDfRAzCrOvthbA539EmtaRLrM_K2UjlfLDhH1_-exoCoDQQAvD_BwE

Ed

Ed,
The module you showed me is not 5ma, it is 5AMP and it is a similar module to what I have, only more modern and 50v VS mine is 36. It will do an awesome job for the generator, however in my opinion 50V is a little bit overkill. I have never seen that somebody will use more than 30V but I may be wrong and also to get up to 50v you will have to provide 50v power supply which will be harder to find and more expensive.  I may be able to help you with the power supply, we use CISCO access points at work which has a 48v power supply. I will search E-Bay and if I find one I will send you a link.


Can you please tell me the difference of 5ma, and 5AMP , And would I be able to set that module at 5ma?
Sorry  electronics is not my strong hold ..
Ed

So I would have to set the Amps At 0.0005A on the module ?

Offline Gene

  • Expert
  • Participant
  • ***
  • Posts: 1757
  • Likes: 190
Re: HOW TO MAKE COLLOIDAL SILVER if you can't get a SilverTron
« Reply #101 on: April 15, 2020, 02:43:14 AM »
1 amp is 1000ma so 0.005amps would be 5ma

danremidanre@gmail.com

  • Guest
Re: HOW TO MAKE COLLOIDAL SILVER if you can't get a SilverTron
« Reply #102 on: April 15, 2020, 02:46:36 AM »
Hi, I'm new here, sorry if I'm questioning on the wrong place..
I have 14V, 11mA .. I'm trying to produce some.. is it good? The ideal is 25 ppm for oral treatment? How long i need to produce 1 litter?
Thanks God bless

Smoke7

  • Guest
Re: HOW TO MAKE COLLOIDAL SILVER if you can't get a SilverTron
« Reply #103 on: April 15, 2020, 03:38:27 AM »
Yes I was look8ng at a 50v 5ma Module to build my own power supply.

https://www.ebay.com/i/253362877198?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=253362877198&targetid=907798224154&device=t&mktype=pla&googleloc=9012276&poi=&campaignid=9338046428&mkgroupid=94993970859&rlsatarget=pla-907798224154&abcId=1139336&merchantid=118852035&gclid=CjwKCAjw1cX0BRBmEiwAy9tKHko8ptjYsioVKfDfRAzCrOvthbA539EmtaRLrM_K2UjlfLDhH1_-exoCoDQQAvD_BwE

Ed

Ed,
The module you showed me is not 5ma, it is 5AMP and it is a similar module to what I have, only more modern and 50v VS mine is 36. It will do an awesome job for the generator, however in my opinion 50V is a little bit overkill. I have never seen that somebody will use more than 30V but I may be wrong and also to get up to 50v you will have to provide 50v power supply which will be harder to find and more expensive.  I may be able to help you with the power supply, we use CISCO access points at work which has a 48v power supply. I will search E-Bay and if I find one I will send you a link.


Can you please tell me the difference of 5ma, and 5AMP , And would I be able to set that module at 5ma?
Sorry  electronics is not my strong hold ..
Ed

So I would have to set the Amps At 0.0005A on the module ?

Ed,
Set your module to CC (current control) to 0.005mA. Do not worry about the voltage. Use around 20-30V it will go up and down depending on the current. At the beginning it will show 0.000mA, however once you start adding electrolytes the current will go up and MUST stop at the 0.005mA. This is what the CC regulator does, it monitors the current. DO NOT set it up by the voltage use, only current control; the voltage will then adjust itself automatically. 


The dot after first digit 0.000 represents the current
The dot after second digit 00.00 represents the voltage.     


Here is the video on you tube may help you with the setting.
https://www.youtube.com/watch?v=4R0ymIulKa0
« Last Edit: April 15, 2020, 04:12:42 AM by Smoke7 »

Etheric Zone 1111

  • Guest
Re: HOW TO MAKE COLLOIDAL SILVER if you can't get a SilverTron
« Reply #104 on: April 15, 2020, 11:37:22 AM »
Awesome thanks!