Hey guys hope all is well! I appreciate you guys, you guys rock!
Just a quick overcap and couple questions about what I'm doing
I'm aiming for sugar reduced colloidal silver
250ml distilled water, simmering hot
5 drops 1Molar Sodium Carbonate
.9999 silver coin Anode, and .999 silver wire cathode
Electrode spacing 1.5 inches
Added 2-3 drops of clear corn syrup
As soon as I turned on my power supply it was on higher then expected, I turned them all down asap and looked my 250ml batch was nothing but bubbles and in a flash yellow, after it cooled it clouded up no good for me (picture 1)
I know I'm suppose to aim for 15ma current for 5 minutes, but my machine only goes down to .1 amp( picture 2), which is 100mA I believe
. Can I do a 20ppm batch in 1 minute @ .1 amp
So now I attempted my second batch
I got it all setup, and as I waited 15 minutes for the water to heat up and start steaming I came back to my 2nd batch, yellow.
picture 3
I didn't even have the cords plugged into the power supply,
Did the hot water, syrup, and stirring free the silver oxide off the coin and turn it to colloidal? Is my second batch safe? It looks safe