Colloidal Silver and Gold Forum

Production Techniques and Chemistry => Questions and Comments about Articles => Topic started by: carlodelmo on May 21, 2019, 01:48:59 PM

Title: Concern about making of colloidal silver
Post by: carlodelmo on May 21, 2019, 01:48:59 PM
I have few questions. I already read the numbered articles.

which is better ionic colloidal silver or reduced colloidal silver? why? is it good to use on pets too?

I'll be using a DC power supply which can use a constant voltage and current, see the picture attached to this message. for this matter if you ever used this equipment what setting for voltage and current should i use to have high quality colloidal silver. I'll be making a 20 ppm colloidal silver solution.


you dont need to elaborate for the explanation just pin points will be fine.

Title: Re: Concern about making of colloidal silver
Post by: kephra on May 21, 2019, 02:17:32 PM
All is explained in the Articles section.  Keep reading.
Title: Re: Concern about making of colloidal silver
Post by: emanwols on May 23, 2019, 04:03:28 PM
I have few questions. I already read the numbered articles.

which is better ionic colloidal silver or reduced colloidal silver? why? is it good to use on pets too?

I'll be using a DC power supply which can use a constant voltage and current, see the picture attached to this message. for this matter if you ever used this equipment what setting for voltage and current should i use to have high quality colloidal silver. I'll be making a 20 ppm colloidal silver solution.


you dont need to elaborate for the explanation just pin points will be fine.
this might help---https://www.cgcsforum.org/index.php?topic=3902.msg33143#msg33143
also do you have a heated magnetic stirrer, how tall is your production vessel,what size electrodes do you have?
In addition to reading the articles i think using the search function will be very helpful to seek out old posts that will definately help you
Title: Re: Concern about making of colloidal silver
Post by: cfnisbet on May 24, 2019, 08:52:43 AM
Always use colloidal silver and not ionic solutions. your constant current generator is fine. use 20 make or less, set constant current. use as big an anode as you can with a piece of copper wire as the cathode.
Title: Re: Concern about making of colloidal silver
Post by: tony14 on May 24, 2019, 01:25:47 PM


I'll be using a DC power supply which can use a constant voltage and current, see the picture attached to this message. for this matter if you ever used this equipment what setting for voltage and current should i use to have high quality colloidal silver. I'll be making a 20 ppm colloidal silver solution.

Your PSU really needs 3 decimal digits or get a meter. [.01A could be anywhere between 10mA & 19mA depending on spec.]

tony
Title: Re: Concern about making of colloidal silver
Post by: cfnisbet on May 25, 2019, 11:25:27 AM
Your PSU really needs 3 decimal digits or get a meter. [.01A could be anywhere between 10mA & 19mA depending on spec.]
Yes, this is true. I have one of these generators and you have to use a separate ammeter to determine the amperage.