Author Topic: Colloidal Silver Color Samples  (Read 65010 times)

john72

  • Guest
Re: Colloidal Silver Color Samples
« Reply #135 on: April 13, 2021, 11:19:16 PM »
no sediment in the water..
I used ; 0ppm pure water, 999.9 silver,  0.5mah 12v dc, 20 drop karbonate (100ml-10.6gr), (I want to use only for mouth and nose)
While electrolyzing, amber fog is mixing from the the dark bar (anode+) into the water
is that normal?
« Last Edit: April 13, 2021, 11:36:36 PM by john72 »

Offline Bobby

  • Expert
  • Participant
  • ***
  • Posts: 1059
  • Likes: 43
  • "I walk slowly, but I never walk backward" Lincoln
Re: Colloidal Silver Color Samples
« Reply #136 on: April 16, 2021, 06:12:26 PM »
john72,

Sounds good so far. Just a few more questions.

The finished colloidal silver must be kept in a place that will not get 

What are you using as a reducer?

How long was the run time?

Also are both the anode and the cathode .999 silver?

Maybe one of our other experts chime in if I’m missing something.

Bobby
"Nearly all men can stand adversity, but if you want to test a man's character, give him power"  Abraham Lincoln

Offline nano-silver

  • Participant
  • **
  • Posts: 117
  • Likes: 5
Re: Colloidal Silver Color Samples
« Reply #137 on: April 17, 2021, 06:44:01 AM »
Sorry I am not right up to scratch with the formulas any more but 20ppm of 1000ml using 0.5 mAh and running for 30 minutes.

This does not sound right??  If I am wrong I apologise  for posting.

Later tonight I may get around to do the math.   :D

Offline cfnisbet

  • Administrator
  • Participant
  • *****
  • Posts: 2558
  • Likes: 184
Re: Colloidal Silver Color Samples
« Reply #138 on: April 17, 2021, 10:08:10 AM »
(Runtime x mAmps) / (15 x litres Distilled Water) = ppm of resulting run

so from your figures,

(30mins x 0.5 milliamps) / (15 x 1) = 1 ppm

You would have to run your system for half an hour per ppm required.

john72

  • Guest
Re: Colloidal Silver Color Samples
« Reply #139 on: April 18, 2021, 08:38:26 PM »
john72,

Sounds good so far. Just a few more questions.

The finished colloidal silver must be kept in a place that will not get 

What are you using as a reducer?

How long was the run time?

Also are both the anode and the cathode .999 silver?

Maybe one of our other experts chime in if I’m missing something.

Bobby

I did not use any reductant since I will put it in the nebilizer .. but I can use maltodextrin..
the electrolysis process took half an hour..
yes, anode and kathode 999 silver
Yellow amber fog is mixed into the water from the anode, which turns black during electrolysis, is this normal?

Offline kephra

  • The older I get, the better I was
  • Administrator
  • Participant
  • *****
  • Posts: 8883
  • Likes: 286
  • Illegitimi Non Carborundum
    • My World As I See It
Re: Colloidal Silver Color Samples
« Reply #140 on: April 18, 2021, 10:09:55 PM »
I believe you did not measure your current correctly.
At .5ma, you would not see amber fog coming from your anode.
Your current is a lot higher than you think.  Solve that problem before going further.
There is the unknown and the unknowable.  It's a wise man who knows the difference.

john72

  • Guest
Re: Colloidal Silver Color Samples
« Reply #141 on: April 19, 2021, 12:48:10 AM »
I believe you did not measure your current correctly.
At .5ma, you would not see amber fog coming from your anode.
Your current is a lot higher than you think.  Solve that problem before going further.
ok..thank you very much  :)

john72

  • Guest
Re: Colloidal Silver Color Samples
« Reply #142 on: April 19, 2021, 11:21:05 PM »
Color indicates particle size.  Orange indicates larger particles or a mixture with larger particles.
And don't obsess with formulas for calculating maltodextrin.  Malto is not a standardized product, and the required amount depends on how the malto was made.  Maltodextrin is a chain of glucose molecules consisting of 3 to 17 glucose molecules in the chain.  Since you don't know the composition of the maltodextrin, you cannot accurately calculate the required amount.

Its best to use too much rather than too little.
Is maltodextrin added when it is hot or after it cools down?

john72

  • Guest
Re: Colloidal Silver Color Samples
« Reply #143 on: April 19, 2021, 11:23:34 PM »
Since ionic silver is clear, it has to be reduced silver.
It was made with maltodextrin.
Is maltodextrin added when it is hot or after it cools down?

Offline cfnisbet

  • Administrator
  • Participant
  • *****
  • Posts: 2558
  • Likes: 184
Re: Colloidal Silver Color Samples
« Reply #144 on: April 27, 2021, 08:32:47 PM »
Since ionic silver is clear, it has to be reduced silver.
It was made with maltodextrin.
Is maltodextrin added when it is hot or after it cools down?
Maltodextrin is added before the run starts.

john72

  • Guest
Re: Colloidal Silver Color Samples
« Reply #145 on: April 29, 2021, 04:04:12 AM »
thanks :)

john72

  • Guest
Re: Colloidal Silver Color Samples
« Reply #146 on: April 29, 2021, 04:07:36 AM »
I did 20ppm, the color was typical, the same, but when it cools down and waits it slightly darkens, it became a little amber, what is the reason ? thanks..  ::)

john72

  • Guest
Re: Colloidal Silver Color Samples
« Reply #147 on: May 07, 2021, 10:36:14 PM »
Great! I love the sound of success :)
The silver water I made without using reducing agents for more use, thanks to your warnings, there is no bitter and metallic taste anymore ... but when it cools down, the tone darkens a little after 2-3 hours, is this normal?

Offline cfnisbet

  • Administrator
  • Participant
  • *****
  • Posts: 2558
  • Likes: 184
Re: Colloidal Silver Color Samples
« Reply #148 on: May 08, 2021, 09:31:41 AM »
The silver water I made without using reducing agents for more use, thanks to your warnings, there is no bitter and metallic taste anymore ... but when it cools down, the tone darkens a little after 2-3 hours, is this normal?
Yes, it's normal. In theory, the reduction should be complete immediately after the run, but I have had this happen on occasion.

john72

  • Guest
Re: Colloidal Silver Color Samples
« Reply #149 on: May 16, 2021, 09:35:57 PM »
thank you sir.. :)