Author Topic: HOW TO MAKE COLLOIDAL SILVER if you can't get a SilverTron  (Read 14169 times)

Offline imcool

  • Participant
  • **
  • Posts: 219
  • Likes: 4
Re: HOW TO MAKE COLLOIDAL SILVER if you can't get a SilverTron
« Reply #135 on: April 20, 2020, 06:41:21 PM »
Thank you!

I ordered everything to start the advanced tutorial!
I am awaiting on a few items .

To recap :

I will be making 20ppm Colloidal silver using Kehpras forum Formula.

I will be using the following :

 :1000ml beaker.
: 2-10 Gauge Silver Anode / Cathode
: 50v 5A Power supply
: will set the current to 5ma
: the voltage will be set to 30v and it will be  monitored to make sure it remains at 10volts or above .
: Electrolysis duration 1:Hr ( Not 100 Minutes ? )

If successful the Tyndall effect should be minimal to none?

Yes, you can forget about any Tyndall, but it should ideally be minimal.

Thanks again!
Ed

Once I have all the items I will make a video so that my children have access to this knowledge in the future..
Good luck ED.
Check the link below. It is a Computer Application for your module. You can install and control your module with your computer or Android phone/pad ETC. If you are a computer person it will be easier. The file you need is DPS5005 (do not download DPH)
https://www.mediafire.com/folder/3iogirsx1s0vp/DPS_communication_upper_computer
thanks @smoke7, i am waiting on my module which i ordered its exact same as Ed module.

Etheric Zone 1111

  • Guest
Re: HOW TO MAKE COLLOIDAL SILVER if you can't get a SilverTron
« Reply #136 on: April 20, 2020, 08:09:06 PM »
I just received my HP 30v 333a Power adapter , do they sell an adapter for this type of plug , that can split into female banana plugs?

I rather buy an adapter than to cut the wires .

Ed

Offline imcool

  • Participant
  • **
  • Posts: 219
  • Likes: 4
Re: HOW TO MAKE COLLOIDAL SILVER if you can't get a SilverTron
« Reply #137 on: April 20, 2020, 08:35:49 PM »
I just received my HP 30v 333a Power adapter , do they sell an adapter for this type of plug , that can split into female banana plugs?

I rather buy an adapter than to cut the wires .

Ed

https://www.molex.com/molex/products/family/microfit_30

they should have it, check with them.

Etheric Zone 1111

  • Guest
Re: HOW TO MAKE COLLOIDAL SILVER if you can't get a SilverTron
« Reply #138 on: April 20, 2020, 08:41:19 PM »
Thank you!

Etheric Zone 1111

  • Guest
Re: HOW TO MAKE COLLOIDAL SILVER if you can't get a SilverTron
« Reply #139 on: April 20, 2020, 09:55:27 PM »
I decided to just cut off the plug, both wires are silver , one insulated wire has white lines on it , it there a negative & Positive ?

Thanks Ed

Offline wgpeters

  • Kephra's other account
  • Expert
  • Participant
  • ***
  • Posts: 634
  • Likes: 75
    • SilverTron Support
Re: HOW TO MAKE COLLOIDAL SILVER if you can't get a SilverTron
« Reply #140 on: April 20, 2020, 10:39:55 PM »
I decided to just cut off the plug, both wires are silver , one insulated wire has white lines on it , it there a negative & Positive ?

Thanks Ed
Of course there is a positive and negative.  Use your voltmeter to determine which is which.
A person's worth is solely determined by what he does for others.

Etheric Zone 1111

  • Guest
Re: HOW TO MAKE COLLOIDAL SILVER if you can't get a SilverTron
« Reply #141 on: April 20, 2020, 11:05:02 PM »
Will do!

Thank you !

Just put the VM on it, the polarity was Incorrect , so I swapped the wires and figured out the - +

Thanks again ...
Ed
« Last Edit: April 20, 2020, 11:23:58 PM by Etheric Zone 1111 »

Offline Smoke7

  • Participant
  • **
  • Posts: 51
  • Likes: 3
  • "A picture is worth 1000 words"
Re: HOW TO MAKE COLLOIDAL SILVER if you can't get a SilverTron
« Reply #142 on: April 21, 2020, 12:29:45 AM »
Will do!

Thank you !

Just put the VM on it, the polarity was Incorrect , so I swapped the wires and figured out the - +

Thanks again ...
Ed
Looks perfect. I love those connectors easy to use and always handy.

For future reference DC adapters/power supply, the wire with white line represent positive (+), but it never hurts to double check.   
« Last Edit: June 08, 2020, 09:03:57 PM by cfnisbet »
"An ounce of prevention is worth a pound of cure"

Etheric Zone 1111

  • Guest
Re: HOW TO MAKE COLLOIDAL SILVER if you can't get a SilverTron
« Reply #143 on: April 21, 2020, 01:02:57 AM »
Thank you !

Etheric Zone 1111

  • Guest
Re: HOW TO MAKE COLLOIDAL SILVER if you can't get a SilverTron
« Reply #144 on: April 21, 2020, 01:28:16 AM »
The module was posted by "Etheric Zone 1111" (Ed) on page 7
 Reply #90 on: April 11, 2020, 06:29:14 PM

I just metered it , and this Dc power cord , the White Line has insulated wire is - and the full black is + kind of wacky ..

Ed 

Offline Smoke7

  • Participant
  • **
  • Posts: 51
  • Likes: 3
  • "A picture is worth 1000 words"
Re: HOW TO MAKE COLLOIDAL SILVER if you can't get a SilverTron
« Reply #145 on: April 21, 2020, 04:34:07 AM »
The module was posted by "Etheric Zone 1111" (Ed) on page 7
 Reply #90 on: April 11, 2020, 06:29:14 PM

I just metered it , and this Dc power cord , the White Line has insulated wire is - and the full black is + kind of wacky ..

Ed
Hmm, It's odd, I am glad you got it right.
« Last Edit: June 08, 2020, 09:04:40 PM by cfnisbet »
"An ounce of prevention is worth a pound of cure"

Offline cfnisbet

  • Administrator
  • Participant
  • *****
  • Posts: 2078
  • Likes: 118
Re: HOW TO MAKE COLLOIDAL SILVER if you can't get a SilverTron
« Reply #146 on: April 21, 2020, 11:50:54 AM »
Looks perfect. I love those connectors easy to use and always handy.
For future reference DC adapters/power supply, the wire with white line represent positive (+), but it never hurts to double check.   
Yes, this is the normal thing, the white stripe indicates +ve

BUT you need to check, unless it is mentioned on the plug or transformer or elsewhere. I blew a CD player because the wires were the wrong way around.

When I bought a SilverTron, the ideal transformer was easily available from Maplin Electronics, who have unfortunately now gone bust. You can imagine how many times I tested it and checked which way round the polarity was, before I dared to hook one up to my precious SilverTron.
« Last Edit: June 08, 2020, 09:05:05 PM by cfnisbet »

Offline Smoke7

  • Participant
  • **
  • Posts: 51
  • Likes: 3
  • "A picture is worth 1000 words"
Re: HOW TO MAKE COLLOIDAL SILVER if you can't get a SilverTron
« Reply #147 on: April 21, 2020, 07:25:58 PM »
Looks perfect. I love those connectors easy to use and always handy.
For future reference DC adapters/power supply, the wire with white line represent positive (+), but it never hurts to double check.   
Yes, this is the normal thing, the white stripe indicates +ve

BUT you need to check, unless it is mentioned on the plug or transformer or elsewhere. I blew a CD player because the wires were the wrong way around.

When I bought a SilverTron, the ideal transformer was easily available from Maplin Electronics, who have unfortunately now gone bust. You can imagine how many times I tested it and checked which way round the polarity was, before I dared to hook one up to my precious SilverTron.
I totally agree. I always double check before using any DC adapters/Charges. I am into remote control airplanes and have tons of lithium polymer batteries, imagine shortening those ;D. Anyways, what exactly is SilverTron? Is it just a power adapter with CC/VC module or is it something special? I was going to build a new generator with 3 way switches instead of a variable potentiometer to control/limit current and just switch on 3mA, 5mA and 15mA. I do have a module that can store up to 10 different settings and can easily program and store into the memory.     
« Last Edit: April 21, 2020, 07:47:15 PM by Smoke7 »
"An ounce of prevention is worth a pound of cure"

Offline imcool

  • Participant
  • **
  • Posts: 219
  • Likes: 4
Re: HOW TO MAKE COLLOIDAL SILVER if you can't get a SilverTron
« Reply #148 on: April 21, 2020, 08:19:35 PM »
Looks perfect. I love those connectors easy to use and always handy.
For future reference DC adapters/power supply, the wire with white line represent positive (+), but it never hurts to double check.   
Yes, this is the normal thing, the white stripe indicates +ve

BUT you need to check, unless it is mentioned on the plug or transformer or elsewhere. I blew a CD player because the wires were the wrong way around.

When I bought a SilverTron, the ideal transformer was easily available from Maplin Electronics, who have unfortunately now gone bust. You can imagine how many times I tested it and checked which way round the polarity was, before I dared to hook one up to my precious SilverTron.
I totally agree. I always double check before using any DC adapters/Charges. I am into remote control airplanes and have tons of lithium polymer batteries, imagine shortening those ;D. Anyways, what exactly is SilverTron? Is it just a power adapter with CC/VC module or is it something special? I was going to build a new generator with 3 way switches instead of a variable potentiometer to control/limit current and just switch on 3mA, 5mA and 15mA. I do have a module that can store up to 10 different settings and can easily program and store into the memory.   

https://www.silvertronstore.com/?page_id=13

Etheric Zone 1111

  • Guest
Re: HOW TO MAKE COLLOIDAL SILVER if you can't get a SilverTron
« Reply #149 on: April 21, 2020, 08:25:59 PM »
Yes I don’t want to fry this lil guy !
Just arrived !

I am awaiting on the project box to start the tutorial generator.
Ed
« Last Edit: April 21, 2020, 09:28:48 PM by Etheric Zone 1111 »